To establish connectivity between “CISCO” CUCM and FIBERME FGX45xx GSM Gateway, it is necessary to enable to “CISCO” CUCM to connect with FIBERME FGX45xx GSM Gateway. This will enable the Extension in “CISCO” CUCM to connect with SIM card and make out call and incoming call in “IVR” or “Hunt group”
CUCM #
Navigate to security -> SIP Trunk security Profile
Navigate to Non Secure SIP Trunk Profile
– Make Incoming Transport Type -> TCP-UDP
– Outgoing Transport Type ->UDP
– Enable Accept presence subscription
– Enable Accept out-of-dialog refer
– Enable Accept unsolicited notification
– Enable Accept replaces header
Click Save
Navigate to Class of Control -> Calling search space
Navigate to E911CSS
Select E911
Click Save
Navigate to Device Setting -> SIP Profile
Navigate to Standard SIP Profile
Enable Disable Early Media on 180
Enable OPTION ping ….
Click save
Navigate to Device -> Trunk
Add New
– Trunk Type -> SIP Trunk
Click Next
– Device Name: “FXG4508“
– Device Pool: Default
– Call Classification: OnNET
– Calling Search Space: E911CSS
– AAR Calling Search Space: E911CSS
– Connected Party Transformation CSS: E911CSS
– Enable Use Device Pool Connected Party Transformation CSS
– Called Party Transformation CSS: E911CSS
– Calling Party Transformation CSS: E911CSS
-Destination IP FGX :192.168.99.67 port: 5060
– SIP Trunk Security Profile: standard presence group
– SIP Profile: Standard SIP Profile
– Rerouting Calling Search Space: E911CSS
Navigate to Route/Hunt -> Route Pattern
Add New
– Route Pattern: XXXXXXXXXXX “You will enter 11 digits here as the mobile numbers.”
– Route Partition: E911
– Description: FXG4508
– Gateway/Route List: FGX4508 “TRUNK name “
– Call Classification: OnNet
In FGX4508 #
Configure the SIP Endpoint #
Navigate to VOIP -> VOIP Endpoint
add new SIP Endpoint
– Name: CUCM
– Enable Anonymous
– Registration: IP Based
– Hostname or IP Address: 192.168.99.201 IP-CUCM
– Port: 5060
– Transport: UDP
Configure Outbound Call Routing #
Navigate to Routing -> Call Routing Rules
Add New Call Routing Rule
Routing Name: From CUCM TO SIM
Call Comes in From: CUCM
Send Call Through: GSM-4
Navigate to advanced
Caller_Dial_pattern : Match Pattern X.
Configure Inbound Call Routing #
Navigate to Routing -> Call Routing Rules
Add New Call Routing Rule
Routing Name: From SIM TO CUCM
Call Comes in From: GSM-4
Send Call Through: CUCM
Navigate to advanced
Forward Number : Number of Extension or IVR or Hunt group or …...
