To establish cloud-based communication between FREEPBX and NEXUSAGE, the extension must be properly registered on NEXUSAGE. Once registered, the extension can be accessed and used remotely through FRC
TOPOLOGY #
IN FreePBX #
-Navigate to Applications → Extensions → Edit Extension
(Select the extension you want to add in NEXUSAGE).
– Copy the extension number and SIP password
These details are required to configure the extension in NEXUSAGE
IN NEXUSAGE #
– Navigate to NEXUSAGE→Connections →Add Connections
– Connection Name : FREEPBX
Used to identify the PBX connection. This value can be changed later.
– IP Address : 192.168.1.10
Specifies the IP address of FREEPBX or the IP-PBX.
– Transport : UDP
Defines the transport protocol used by the extension (UDP/TCP/TLS). By default, UDP is used.
– Port : 5060
Specifies the SIP protocol port (e.g., 5060 or 5080). By default, 5060 is used.
Ensure that if the Transport is changed, the Port may also need to be updated.
– Save
– Navigate to NEXUSAGE→Extensions →Add Extension
– Name : DEXTER
Specifies the extension name. This value can be changed at any time.
– Extension Number : 101
Defines the extension number created in FREEPBX.
– Connection : FREPBX
This is the connection created earlier in NEXUSAGE using the FREEPBX IP address.
(To change the connection, the extension must be deleted and recreated in NEXUSAGE)
– Password : DEX@2107
Defines the SIP password configured for the extension.
– Concurrent Registration : 1
Specifies the number of devices allowed to register this extension. This value can be changed at any time.
– Save
– Navigate to NEXUSAGE→FRC
– Copy Domain : yourmacaddres.x.fiberme.cloud
Used to configure the extension for cloud access.
– Note: Transport is TLS
Specifies the transport protocol used for FRC communication.
– Note: Port is 5162
Specifies the port used for FRC communication.
NOW: Ensure that the extension is registered in FREEPBX.
If the extension does not show as Connected, there may be an issue.
Review the configuration steps and verify network connectivity with FREEPBX
Finally, use this extension in your IP-Phone, Soft Phone in mobile (FIBERME SWING LITE) , Soft Phone in PC (FIBERME SWING)
You will need
- Number of extension: 101
- Sip password: Dex@2107
- Domain :
yourmacaddres.x.fiberme.cloud - Transport: TLS
- Port: 5162
