How to register RFC FIBERME FCM5600 With FGX45XX


To establish connectivity between the FCM5600 and the FIBERME FGX45xx GSM Gateway Remotely , it is essential to enable the FCM5600 RFC to connect with the FIBERME FGX45xx GSM Gateway. This configuration allows the extension in the FCM5600 to integrate with a SIM card, enabling both outbound and inbound calls through the “Extension” or “Queue” via the cloud, eliminating the need for local connectivity.


TOPOLOGY #


On FCM5600 (IP-PBX) #

1- Navigate to PBX Settings-> Extensions/Trunks -> Trunks.

2- Choose Trunk and navigate to add. 

– Make Type “Server mode

– Enable “Authentication” 

-Write your Domain in  ” Out Proxy Server ” -> yourdomain.eu.pbxproxy.com    

– Write Out proxy port -> 5162

– write username -> any name you need as 2107

– Write Password 

3- Navigate to Other

– Make Transport Protocol -> TLS

– Write your trunk name in “From User

– Write your Domain in “From Domain

 

– Click on Submit Then aplay changes


Configure Outbound Routes on FCM5600 #

Navigate to “PBX Settings -> Outbound Control -> Dial Rules”

– Press on + to add new rule

– In the Dial Pattern field, please write: X.

– From “Available Trunks” please select the trunk that you created “2107

– Click on “Submit” to save to rule details.

Please be sure that all extensions in IPPBX can use this dial rule.


Configure Inbound Routes on FCM5600 #

1- Navigate to “PBX Settings -> inbound Control -> CID/DID Routing”

2- Press on Add to add new rule

-DID Number : 7777 (This number we will configer it in FGX45XX in Forward Number)

– Destination Type: IVR (any Destination you need)

– Inbound Destination

 – Click on Submit Then apply changes


FGX45XX (GSM GETAWAY) #

1-Navigate to VOIP -> VOIP Endpoint 

2- Add new SIP Endpoint 

– Name: FCM5600

– User name : 2107

– Password

 – Registration: client

– Hostname or IP Address: Your Domain

– Port: 5162

– Transport: TLS

Make Tlsverify: NO

Make Encryption: NO

3- Navigate to Sip Account Security

4- TLS Setting

– Make TLS Enable

– Make TLS Verify server disable

– Port :5162

– TLS Client Method : tlsv1

5- Nevigate to TLS Keys

– Type : Server

– Key Name : fcm5600

– IP Address: 192.168.1.100 (FGX45XX IP)

– Organization (company name)

– Password

Press on Create


Configure Outbound Call Routing #

1- Navigate to Routing  -> Call Routing Rules 

– Add  New Call Routing Rule

– Routing Name: From FCM5600 TO SIM

– Call Comes in From: FCM5600

– Send Call Through: GSM-4

2- Navigate to advanced 

– Caller_Dial_pattern :  Match Pattern     X. 

3- Press save


Configure Inbound Call Routing #

1- Navigate to Routing  -> Call Routing Rules 

– Add  New Call Routing Rule

– Routing Name: From SIM TO FCM5600

– Call Comes in From: GSM-4

– Send Call Through: FCM5600

2- Navigate to advanced 

– Forward Number : 7777

3- Press Save then Apply

What are your feelings