To establish connectivity between “CISCO” CUCM and FIBERME FGX45xx GSM Getaway , it is necessary to enable to “CISCO” CUCM to connect with FIBERME FGX45xx GSM Getaway . This will enable the Extension in “CISCO” CUCM to connect with SIM card and make out call and incoming call in “IVR” or “Hunt group”
CUCM #
Navigate to security -> SIP Trunk security Profile
Navigate to Non Secure SIP Trunk Profile
– Make Incoming Transport Type -> TCP-UDP
– Outgoing Transport Type ->UDP
– Enable Accept presence subscription
– Enable Accept out-of-dialog refer
– Enable Accept unsolicited notification
– Enable Accept replaces header
Click Save
Navigate to Class of Control -> Calling search space
Navigate to E911CSS
Select E911
Click Save
Navigate to Device Setting -> SIP Profile
Navigate to Standard SIP Profile
Enable Disable Early Media on 180
Enable OPTION ping ….
Click save
Navigate to Device -> Trunk
Add New
– Trunk Type -> SIP Trunk
Click Next
– Device Name: “FXG4508“
– Device Pool: Default
– Call Classification: OnNET
– Calling Search Space: E911CSS
– AAR Calling Search Space: E911CSS
– Connected Party Transformation CSS: E911CSS
– Enable Use Device Pool Connected Party Transformation CSS
– Called Party Transformation CSS: E911CSS
– Calling Party Transformation CSS: E911CSS
-Destination IP FGX :192.168.99.67 port: 5060
– SIP Trunk Security Profile: standard presence group
– SIP Profile: Standard SIP Profile
– Rerouting Calling Search Space: E911CSS
Navigate to Route/Hunt -> Route Pattern
Add New
– Route Pattern: XXXXXXXXXXX “You will enter 11 digits here as the mobile numbers.”
– Route Partition: E911
– Description: FXG4508
– Gateway/Route List: FGX4508 “TRUNK name “
– Call Classification: OnNet
In FGX4508 #
Configure the SIP Endpoint #
Navigate to VOIP -> VOIP Endpoint
add new SIP Endpoint
– Name: CUCM
– Enable Anonymous
– Registration: IP Based
– Hostname or IP Address: 192.168.99.201 IP-CUCM
– Port: 5060
– Transport: UDP
Configure Outbound Call Routing #
Navigate to Routing -> Call Routing Rules
Add New Call Routing Rule
Routing Name: From CUCM TO SIM
Call Comes in From: CUCM
Send Call Through: GSM-4
Navigate to advanced
Caller_Dial_pattern : Match Pattern X.
Configure Inbound Call Routing #
Navigate to Routing -> Call Routing Rules
Add New Call Routing Rule
Routing Name: From SIM TO CUCM
Call Comes in From: GSM-4
Send Call Through: CUCM
Navigate to advanced
Forward Number : Number of Extension or IVR or Hunt group or …...
